Planning your Bathroom

Design Dilemma: Restricted wall space on one wall

Roman Design Solution

• Opt for an off-set quadrant style enclosure that cleverly makes use of awkward sized walls where one side is less than 700mm.
• It will transform a small space into a large efficient showering space, utilising often unused floor space. The result is an expansive active showering area.
• The sliding door feature means the door will not project out into the surrounding bathroom space, allowing more space for bathroom accessories and furniture.
• The following products offer the perfect solution:
  • Desire Three Quadrant
  • Orbital Three Quadrant
  • Our Embrace and Collage ranges also offer off-set quadrant options.

Before	After

Design Dilemma: Bath replacement using existing space

Roman Design Solution

If you do not have enough space for a shower and a bath, or are looking for an inclusive design product with easy access features then a bath replacement product is the perfect solution.

• Opt for products that replace the exact footprint of a standard bath.
• This offers an expansive showering area that opens up to an indulgent 1700 x 900mm of showering space.
• A walk-in style bath replacement enclosure with low level access offers the ultimate in inclusive design without compromising on style.
• The Orbital Colossus is the perfect solution and is available straight to floor or to a low level shower tray.
• If you would prefer to opt for an enclosed walk-in and have a slightly larger footprint available, then the Orbital Slide is a perfect solution.

Before	After

Design Dilemma: Wider aperture enclosure opening required due to the room design and obstructions

Roman Design Solution

If you are restricted by bathroom furniture or a bathroom door, and do not want the door to your enclosure to project out into the surrounding space - opt for a space saving sliding door or an inward opening bi-fold door.

• These are available across our 4 ranges.
• Specifically, the Embrace Three Panel Sliding Door offers the ultimate space saving feature due to the three panel sequential sliding door system. This optimises the entrance width for ease of access.

Before	After

Design Dilemma: Power shower proof bath screen required - other bathroom furniture restricts movement

Roman Design Solution

• If you do not have enough space for a separate showering facility and bath but do not want to replace the bath completely – opt for an over-the-bath showering solution.
• There is a wide range of bath screens that are compatible with power showers - no need to compromise on functionality.
• There are a number of models available with an inward or outward opening mechanism which still allow full access to the bath.
• The Embrace Folding Screen is a perfect over-the-bath showering solution for when space is limited. The dual folding operation provides ultimate flexibility, as it allows complete access to the bath for cleaning and bathing.
• Our Orbital and Collage ranges also encompass a series of folding bath screen solutions.

Design Dilemma: Bath to be replaced but door and window dimensions and position prohibit a shower enclosure

Roman Design Solution, for the most common UK Problem...

• For a bath replacement style product that is restricted to a single wall installation with limited space and with window or door restrictions - opt for the Trapezium enclosure.
• This angled enclosure effortlessly fits around bathroom restrictions without compromising on showering space.
• An extremely cost effective showering solution to install in an existing bathroom; there is no need to re-design the bathroom layout or move door frames.
• It leaves three walls untouched and free for other bathroom essentials.
• The inward opening bi-fold door feature does not project out into the surrounding bathroom space.
• At only 1180 x 780mm this neat solution is space saving but provides a generous showering area.
• The Trapezium is available in two ranges: our Embrace Trapezium and Collage Trapezium ranges.

Before	After

Design Dilemma: Do not want to channel new plumbing into the walls for a new valve

Roman Design Solution

• If you are just replacing your showering solution and do not want to disrupt or interfere with your existing tiled walls, opt for the Embrace Shower Valve.
• It cleverly integrates into the corner profiles of a selected range of products in the Embrace collection.
• It is an easy retrofit and a cost effective solution.
• The valve is ceiling fed with the processor stored out of sight in the loft for a quick and easy installation.
• It is compatible with all approved plumbing systems.
• The option of a remote control lets you operate the shower from outside the enclosure.

Design Dilemma: Need a level access shower for ease of use, or want the look of a wetroom with the reassurance of a tray

Roman Design Solution

• If you are replacing your existing bathroom design for an inclusively designed bathroom, then a level access solution is worth considering.
• Opt for a wetroom and tank out the entire area with one of our complete wetroom kits which contain everything you need to create a water tight wetroom.
• We offer a choice of a level access trays which provide the reassurance of a tray but the benefit of complete level access. They can be installed straight to joists and once the tiles are laid it creates complete level access.

Before	After